So, you just realized that your Frigidaire ice maker is not working, but the water does get cold. Don’t worry because this is a common issue that can be fixed with a few DIY solutions.
In most instances, you wouldn’t need to call a technician. Not until you’ve read our troubleshooting guide and tried out the fixes.
But, before that, you need to know how the ice maker system works to get a better understanding of the malfunctions.
How does a Frigidaire ice maker work?
An ice maker is simply a plumbing fixture with electrical components inside a refrigerator that automates the manual ice-making process.
When you connect it to a power and water source, an electrical signal is sent to a water valve to release water into the ice mold. The freezer will start freezing the water immediately and stop when an internal thermostat indicates that the ice cubes have reached 5-9 Degrees Fahrenheit.
Next, a heating coil is activated momentarily to loosen the ice cubes from the molds. You then have ejector blades pushing the ice cubes into a collection tray. Immediately, the tray is full; a signal is sent to stop the ice production cycle.
All the steps in the cycle are interdependent. So, when one step fails, everything stalls. And that could be the reason your Frigidaire ice maker is not working.
Read Also: List of the best ice crushers for margaritas
Possible reasons why your Frigidaire ice maker isn’t working
The most common problems with the Frigidaire ice maker are caused by:
- A clogged water filter: Debris and other foreign particles could accumulate and clog the filter.
- Low water pressure: The water inlet valve requires a minimum of 20 psi of water pressure.
- A faulty water inlet valve hinders the water supply through the system.
- High freezer temperature: The freezer works best when the temperature is between 0 and 5 degrees Fahrenheit.
- A faulty thermostat: This prevents the continuation of the ice production cycle since the system can’t read the ice temperature.
- A faulty ice maker motor affects movement in the ice maker cycle.
- Clogged or frozen fill tubes: This affects water intake in the ice maker.
- A faulty ice level control board: With this out of order, the system can’t tell how much ice is produced, so it halts the process.
Others that are not related to the ice maker system are:
- A faulty door seal: This affects the stability of the freezer temperature, thus preventing ice production.
- Faulty door switch: When the freezer door switch malfunctions, the light in the freezer turns on and the ice maker turns off.
How to fix Frigidaire ice maker issues
The solutions to the ice maker issues include:
1. Turn On the ice maker
Make sure you turn On your ice maker before you start troubleshooting other issues. You might have turned On the refrigerator and forgot to switch On the ice maker.
2. Reset the ice maker
Fortunately, most of these problems can be solved by simply resetting the ice maker. Here is how to reset your Frigidaire ice maker.
First, adjust the feeler arm. This is the plastic or metal rod that moves up and down depending on the level of ice in the ice maker. It prevents the production of too much ice.
- Push the arm down if it’s stuck at the top.
- This will allow water to flow into the ice molds.
Next, press the ice maker’s On/Off button or the reset button
- You’ll find the On/Off button on the front control panel.
- Press and hold the button until the LED turns red.
- Wait for 15 minutes.
- Press and hold the button again until the LED turns green.
- Your Frigidaire ice maker is now reset. Check if it’s working.
Also, you could just press the reset button directly. But where is the reset button on the Frigidaire ice maker?
- It’s under the motor housing when you remove the top cover.
- Press and hold the button for 10 seconds to reset the ice maker.
- You can release it sooner if you hear a chime inside the refrigerator or the ice maker starts operating.
Lastly, to reset your Frigidaire ice maker, unplug the refrigerator power source, wait for a few minutes, and plug it back on. If you have a built-in refrigerator that’s hard or impossible to move, simply switch it Off then back On.
Read Also: How to fix a Samsung dryer that keeps shutting off
3. Defrost the refrigerator water line
When frozen water clogs the supply line, switch off the refrigerator for a few hours to allow the line to defrost.
4. Replace the water filter
If you notice your ice maker isn’t producing enough ice or the cubes are becoming smaller, you’re dealing with a clogged water filter.
You need to replace it immediately to ensure the ice maker performs optimally.
5. Check the error codes
Look at the error codes on the control panel, then crosscheck in the manual or the manufacturer’s website if they relate to the ice maker.
Get a hairdryer and melt the ice for simple issues like ice covering the freezer air vents or ice on the fan blades.
Conclusion
From this guide, it shouldn’t be hard to reset and troubleshoot your Frigidaire ice maker. But, if nothing works, you could be dealing with a bigger issue that requires the expertise of a technician to diagnose and solve.
Usually, for electrical or mechanical issues within the ice maker, it’s recommended that you replace the entire unit since they’re not built for disassembly.