Bathrooms are full of germs, whether in your home or commercial places. Whether you are a germaphobe or not – having a touchless toilet in any of these places would be a welcome idea. Toilets that flush hands-free are fast becoming quite common in many public areas.
However, if you don’t have enough money to purchase a new unit, the Kohler touchless toilet kit will help you bring the touchless flash feature to your toilet.
The Kohler Touchless Toilet Kit aims to automate flushing the toilet. The most interesting thing about this product is that it works on existing toilets meaning it would not cost you much.
Kohler Touchless Toilet Kit – how it works
Installing the kit is quite easy and takes a few minutes. Upon activation, the Kohler Touchless Toilet Kit replicates the actions of a traditional manual toilet handle – it pulls the chain up, opens the flapper, and lets water from the reservoir into the toilet bowl.
It does all this automatically without you having to touch it. What is impressive with Kohler Toilet touchless technology is its ability to sense a hand through a thick porcelain water reservoir lid.
The touchless kit comes with an actuator and a plug that you will use to cover the hole that allowed the old handle to connect to the reservoir.
In addition, you get four AA batteries and a unique sticker, which you should place on the lid to note where the kit’s sensor is for the best performance.
When you hover your hand over the sticker for a moment, you should hear a soft beep, after which the flushing mechanism does its job.
Pros
- Easy installation
- Easy to use
- Reduces contact with germs
- Kid-friendly/fun to use
- You can still retain the flush handle
Cons
- The reservoir lid has to be free of any items
- You may accidentally set it off if you bump into it
Read Also: The best automatic soap dispensers
How to install Kohler Touchless Toilet Kit
My hope is that your toilet is compatible with this kit and that you have already purchased and are ready to install it.
The installation process is simple – but remember, DO NOT leave the batteries inside while installing the unit since it will keep on flashing whenever you move your hand over the infrared sensor.
- Turn off the toilet’s water supply
- Flush the toilet to remove any water from the reservoir tank
- Clean up the reservoir tank
- Close the toilet seat first just in case you drop some items during the installation process
- Take out the chain and the handle from the reservoir
- Separate the chain from the flapper
- Cover the hole on the reservoir where the handle was using the plug that comes with the Kohler kit
- Position the provided bumpers on top of the reservoir tank where it touches the lid
- Slide the Kohler kit with the device into the toilet and support it using hooks on the reservoir
- Measure then connect and cut the chain that connects the flapper to the device if necessary
- Install the AA batteries by placing them in the battery holder in the module
- Replace the lid with the reservoir tank
- Place the provider sticker onto the side where the module is on the lid
- Turn the water supply back on
- Wave your hand over the sticker and experience the magic of using a touchless toilet
- Get back to your daily activities, knowing you will now have germ-free toilet usage for a long time
This whole process takes a short time. Twenty minutes will be sufficient for you to do everything, including unpacking the device.
How to replace the battery on the Kohler Toilet Kit
NOTE: Do not use lithium-ion batteries in this unit because such batteries may cause fire upon exposure to water.
In case you are wondering what the Kohler Touchless Toilet battery life is – the four AA batteries can last for between 6-12 months. When the batteries are running low, the Kohler kit beeps five times upon activation. Replacing the batteries is quite simple:
- Open the reservoir lid and then also open the module lid
- Pull out the battery holder from the module
- Remove the old batteries and then load the new ones as required
- Return the battery holder into the module and close it
- Replace the reservoir lid and get back to the touchless toilet experience
Our recommended batteries for this toilet kit are:
- Duracell Quantum AA Alkaline Batteries (Best Overall)
- Energizer L91BP-8 Ultimate Lithium AA Batteries (Best Budget)
- AmazonBasics AA Rechargeable Batteries (Best Rechargeable)
Kohler Touchless Toilet troubleshooting
The toilet unit can experience a few problems like any other electric device. A common Kohler Touchless Toilet problem is – the Kohler Touchless flushing on its own.
If the Kohler Touchless Toilet keeps flushing on its own, you can simply call the manufacturer and be sure that you will get assistance in time. The most probable cause of this problem may be the kit having some wrong parts that you can easily swap out for the right ones.
If you have a Kohler Touchless Toilet not flushing problem, check whether you have installed the batteries correctly or if they are depleted and replace them. If it still does not work, try removing slack from the chain and confirm that the chain is attached to the flush valve and wheel.
Read Also: The best dual shower heads for couples
Also, the system may be able to flush but produce a week flush. In this case, you should also check for slack on the chain. For sensor issues such as hovering too close – relocate the emblem if not correctly positioned. You can also move the module upwards if there is enough room.
Having a touchless toilet without replacing the whole unit is a welcome idea to many. Furthermore, it is a great way to add fun to your toilet experience besides avoiding germs by utilizing fancy technology.
If you have kids, brace yourself for frequent flushing, at least for the first few days after installation. The Kohler Touchless Toilet Kit is a useful tool that is convenient, easy to install, affordable, and beneficial to your and your family’s wellbeing.
Check its current price on Amazon.