The Stanley Fatmax Powerit 1000a is an essential jump-starting item for car owners. It comes in handy when your car battery dies in the middle of nowhere, and there’s no other car in sight. It also features a compressor that would inflate tires effortlessly and an in-built USB port for charging electrical devices.
Unfortunately, just like most appliances, it’s not immune to malfunctions. Users have complained that their Stanley Fatmax Powerit 1000a turns on itself, doesn’t turn on, keeps beeping, and has many more problems.
The issues are inconveniencing and challenging, especially when they happen unexpectedly and you don’t know the cause of the problem or how to fix it. With the Stanley Fatmax Powerit 1000a troubleshooting tips below, you will not only identify the problems but also fix them.
Common Fatmax Powerit 1000a problems and their fix
These are the most common issues you will experience while using the Powerit 1000a.
The Stanley Fatmax Powerit 1000a won’t turn on
When your Fatmax Powerit 1000a doesn’t turn on, it could be because of issues like dead batteries and lack of charge or complex internal damage to essential components.
To fix this, try the following solutions:
- Check the batteries: Even though it has a huge battery capacity that can’t be depleted easily, you should check to be sure. In fact, to avoid surprises, charge your Fatmax Powerit 1000a at least once per month or whenever the charge runs low. Also, charging helps to maintain the battery life. If the batteries are faulty, you should replace them with new ones immediately.
- Run a power cycle: Power cycling the Fatmax Powerit 1000a helps correct minor system glitches affecting performance. It’s as simple as turning off the device and then waiting a few seconds before switching it back on.
- Turn off the compressor switch: While jump-starting your car or charging other electrical appliances, ensure the compressor switch is off to avoid interference.
READ: How to troubleshoot the Pentair Mastertemp 400
Stanley Fatmax Powerit 1000a keeps beeping
The Stanley Fatmax Powerit 1000a has an in-built safety system that sounds an alarm whenever there’s an incorrect connection. Therefore, to stop the beeping sound from your device, check your clamps connection and correct it.
Also, if you’re running low on oil or used unfiltered or the wrong oil, the Fatmax Powerit 1000a will beep consistently. You’ll have to refill the oil or change it entirely to prevent irreversible damage to parts like the piston, valve, and jack.
Stanley Fatmax Powerit 1000a doesn’t keep charge
If you notice your Fatmax Powerit 1000a drains its battery fast, you may have been leaving it On after use. This forces you to charge it more frequently than necessary. So, to avoid that, ensure it’s switched off after use and stored in a safe place under room temperature.
The LED indicators don’t illuminate
If you pressed the battery status button, but the battery status indication didn’t show, your battery might be completely depleted. You should recharge it, then press and hold the status button again for a few seconds.
The compressor will not inflate
When your compressor fails to inflate, you should try the following:
- Ensure the compressor is turned On.
- Confirm if the Fatmax Powerit 1000a is charged.
- Ensure the nozzle is attached firmly to the tires. If it’s damaged, replace it immediately.
- Press the On/Off button to switch the compressor Off and let it cool for at least 10 minutes, then try to inflate your inflatables.
The USB port doesn’t power the appliance
Check if the USB power button is turned on to troubleshoot USB issues. Next, confirm your Fatmax Powerit 1000a charge. Lastly, check the USB port for damages.
Stanley Fatmax Powerit 1000a is not charging
Charging issues are mainly caused by a faulty charging cord, power outlet, or battery. So, to be sure, try a different cord, connect to another power outlet, or replace the batteries.
READ: The best generator for RV air conditioner
The Fatmax machine starts the stops
When you encounter this problem, you may be using the machine aggressively, running low on water or oil, the valve is damaged, or there’re other internal motor issues. To solve the issue, let the machine rest after continuous usage and don’t overload it. Also, refill the oil and water levels, and replace damaged parts.
Fatmax Powerit 1000a emits cold or hot air
The temperature of the air coming from the compressor should be balanced. Mismatched air temperatures could damage the air calve, air tank, and pipe. The problem is caused by the accumulation of dirt in the compressor, over or under the compressor, and using the compressor for long without a break.
You can avoid these issues when you let the machine rest and check and repair or replace worn-out parts.
Air pressure and flow problems
Low or high air pressure and flow also significantly impact your Fatmax compressor’s performance. The source of the problem could be a faulty piston, valve, gasket, power switch, air filters, fuse, jack, or even power supply.
Check each of them and replace those that are completely worn out. Next, reset the Stanley Fatmax Powerit 1000a and check if the air pressure and flow are balanced.
How long does Stanley Fatmax last?
After the initial charge when you purchase the Stanley Fatmax Powerit 1000a, it can retain the charge for up to 12 months if it’s not in use. However, the charge can only last 1 hour on the highest setting and 7 hours on the lowest setting.
How long does it take to charge a Stanley Fatmax Powerit 1000a?
The time taken to charge your Fatmax to full capacity depends on its discharge level. It’ll need 12-14 hours to recharge if it’s completely discharged. You will know it has finished charging when the LED indicator illuminates, and the green LED light flashes
That wraps up our Stanley Fatmax Powerit 1000a troubleshooting guide. Hopefully, one of the solutions helped you correct a recurring problem, and your machine now works efficiently. You can avoid future problems by simply reading the manufacturer’s user guide and following all the recommendations.
If nothing works, get in touch with the Stanley support team and inform them of your predicament. They’re better placed to understand the problem, diagnose it, and provide the right solution. Also, you should know that they have great warranty policies that will help you save a lot on repair expenses.