You might have noticed that your beverage is not as tasty and aromatic as it previously was because the water boiler is dirty. We will explain how these scales form in the Panasonic water boiler. You will also learn easy step-to-step procedures for cleaning a Panasonic water boiler.

Why is my Panasonic water boiler scaly?

Water contains natural minerals such as calcium and magnesium that, when boiled, leave deposits in the kettle. 

With time, these deposits form buildups that alter your beverages’ taste. It is therefore important that you clean your water boiler to remove limescale buildup and improve your tea’s taste.

How often should you clean a Panasonic water boiler?

It is recommended that you clean your water boiler every three months. If you are using hard water, clean your kettle every month because it contains a higher amount of minerals than soft water.

How to clean your water boiler

The recommended way to clean your water boiler is by using cleaning agents such as the Zojirushi #CD-K03EJU. Follow the instructions on its package closely for you to clean your Panasonic boiler the right way.

However, if you are interested in natural methods, you can use either:

• Lemon juice
• Vinegar

Clean a water boiler with lemon juice

You can clean a Panasonic boiler with citric acid or lemon juice. It is an easy and fast way of cleaning up your water boiler. It also gets rid of limescale deposits present inside. Follow these steps to clean your water boiler using lemon juice:

• Pour half a cup of lemon juice into the water boiler and add water up to the maximum level line.
• Turn on the water boiler to boil the water.
• Pour out the boiled water and water at room temperature to the maximum level line.
• Boil the water again to remove the lemon or citric acid smell.
• When the water is boiled, pour a little water and let the rest cool.
• Once the water is completely cooled, empty it completely.

Clean a Panasonic boiler using vinegar

Vinegar is a good solution for cleaning up scaly deposits and limescale deposits. It is a DIY descaling agent that is accessible at home for cleaning a Panasonic boiler. You can clean your water boiler with vinegar using the following steps:

• Before starting the cleaning process, ensure that the mesh filter is properly attached to the container.
• Mix one cup of white vinegar and three cups of water in the water boiler’s container and close the lid.
• Bring the mixture to a boil.
• Let the mixture cool for 15 to 20 minutes.
• Pour out the mixture and rinse the container by pouring fresh water into the container and boiling it. 
• Once the water is boiled, let it cool for 15 minutes, and then pour it out.
• If you notice any discoloration or remaining buildup inside the container, remove it by gently rubbing a wet non-abrasive sponge in the inner container.

Remember to clean the filter because when clogged, it prevents water from flowing to the container. You can clean it using a brush and then reattach it to the container.

The post How to clean a Panasonic water boiler appeared first on Home Gadgets.

As a buyer, you definitely want the best and that’s why you’re reading this comparison. As a result, I have spent hours researching and consulting with experts about these water boilers. Besides using them, I have also read multiple consumer reviews about the same and contacted other buyers for more details.

In the end, I have come up with this review, which I believe will help you make a decision that will impress you for as long as you own that water boiler and warmer.

Read Also: The best water boiler and warmer

There is a high chance that you can relate to the hassle of using a traditional electric kettle to heat your water. You have to reheat your water for that second cup of coffee. As such, electrical kettles lead to energy wastage and are less environmentally friendly. Also, if your kettle has a plastic interior, which puts you at risk of becoming a victim of the harmful effects of BPA.

With a good water boiler, you can avoid all these problems thanks to its keep warm feature. Below is a comparison between two of the leading water boiler brands, Tiger vs Zojirushi.

Zojirushi vs Tiger comparison

Design & build

Zojirushi water boilers normally have a stainless steel body with a hard plastic bottom and top section. Right on the metal body, there is a panorama window that allows you to easily see the water level, which is crucial. The upper part is made of hardened plastic with the front section containing the timer and control units. The interior side of the Zojirushi water boiler is made from non-stick material, which is easier to maintain, doesn’t rust, and doesn’t contain harmful elements like BPA. It comes with a detachable power cord.

Just like the Zojirushi, the Tiger water boiler has an entire body made from stainless steel except for the upper and lower sections. In the middle, there is a normal glass window for viewing the water level, which is not as efficient as the Panorama window in the Zojirushi. It has fewer controls at the top and has a timer for inputting settings. The inside lining consists of a non-stick coat that is BPA-free and easy to clean and maintain. It also has a detachable power cord for increased safety and convenience.

Winner: Zojirushi

Capacity

With the Zojirushi water boiler, you will get to choose between 3.0L, 4.0L, and 5.0L. The CD model comes in these three capacities while the CV model comes only in 4.0L and 5.0L. Whether you want hot water for preparing baby food or for personal use at the press of a button, any of these capacities will suit you well.

The tiger water boiler, on the other hand, is available in 2.9L, 3.0L, 4.0L, and 5.0L depending on the model you select. The PDR is available in 3.0L, the PIF in 2.9L, PVW in 2.9L, and the PDU in 3.0L, 4.0L, and 5.0L.

Winner: Tiger

Performance

This water heater and warmer are a joy to use. It comes with 4 keep warm temperatures, 160, 175, 195, and 208 degrees Fahrenheit, which are sufficient for any teas and foods.

It also comes with a Quick temp function that enables it to reach 160 and 175 degrees Fahrenheit without reaching boiling point. How is this important? Well, this saves more power compared to conventional heating used in other brands where water has to reach its boiling point first. Its keep warm feature keeps water at your preferred temperature for as long as you need it.

READ: Can you put milk in an electric kettle?

The Tiger water warmer and boiler comes with 4 different temperatures, which are 158, 176, 194, and 208 degrees Fahrenheit which are more exact for specific teas and don’t differ very much from the Zojirushi. It also has two sleep timer settings for 6 and 9 hours which help conserve energy. Its re-boil function quickly brings water to boil whenever you need it.

Winner: Zojirushi

Energy consumption

Both models consume less electricity but the Zojirushi has an upper hand due to its Quick Temp technology that accelerates the way water is heated to your preferred temperature. While Tiger has several sleep timer settings for energy conservation and re-boil function, the Quick Temp function does a better job.

Winner: Zojirushi

Cost

Whether you need a good water boiler and warmer for home or commercial use, price is always an important factor to consider. It’s always the best combination between performance and price that consumers tend to look for. In this case, the Tiger is priced lower than the Zojirushi by a few bucks. You can view Zojirushi’s price here and the Tiger’s price here.

Winner: Tiger

Verdict

Zojirushi vs Tiger is a topic that will always surface whenever people are talking about water boilers and warmers. This is not to say that there aren’t any other brands in the market –just that these are two of the best. Having reviewed different aspects of these boilers, there isn’t a big difference in between. However, the Zojirushi beats its competitor marginally in various crucial factors such as performance and energy consumption and as such is the best water boiler and warmer that you can get in the market right now.

Overall winner: Zojirushi

The post Tiger vs Zojirushi water boilers: Which is the best? appeared first on Home Gadgets.

But if you own a water boiler, then one of the things you must be wondering is how to clean it. Since it is an electronic appliance, you can’t just submerge it in water.

You can’t leave it uncleaned either since it is an appliance used to prepare water for food items so it must be kept clean at all times.

In this article, we will show you how to clean a Zojirushi water boiler and remove limescale, rust, and any sediments. This procedure is also essential when removing scum and dirt inside or outside the appliance.

What you need

1. Citric Acid (A special concentrate that is made and recommended by Zojirushi)
2. Water

How to clean Zojirushi water boiler (step-by-step guide)

1. Add a 2-3 tablespoonful of citric acid into the liter of water and stir to dissolve.
2. Pour the solution into your empty Zojirushi boiler, fill it to the brim with water and close the lid.
3. Turn on your Zojirushi boiler and press the REBOIL button for 3 seconds or more to activate the descaling mode.
4. After the water boils, open the lid and scourge it with a wooden scourge to remove scum from its sides.
5. Pour out the first cycle boil water preferably from the spout rather than the open top. This flow facilitates the cleaning of the spout. Dispose of the water from the “EMPTY FROM HERE” outlet.
6. Wipe it with a clean kitchen towel to rid it of any scale left on the sides. If you are just about to use the boiler, this step may not be necessary.
7. In case you are wondering how to get rid of that citric acid smell, add more water to the inner container and boil a cup of water, allow for it to cool and dispense it.
8. Repeat the cleaning process as many times as possible until you are satisfied.

How often should I clean Zojirushi water boiler?

It is commendable to clean your Zojirushi at least 2 times a year. You should, however, clean it more than twice a year if you use hard water most of the time.

What budget should you set aside for cleaning?

You don’t need that much to clean your Zojirushi water boiler. The only expenditure you will incur is on Citric Acid. You can check its current price here. A single pack should clean your appliance at least 3 times.

The post How to clean a Zojirushi water boiler to remove rust and sediment appeared first on Home Gadgets.