But recently, many users have complained about Mr. Coffee Iced Coffee Maker’s start button not working. This can be quite inconvenient, especially if you are in a hurry.

The good news is that there are a couple of ways you can fix the coffee maker. You just have to understand what causes it not to start. This is where our troubleshooting guide comes into play.

Mr. Coffee Iced Coffee maker won’t start?

When Mr. Coffee Iced coffee maker is not starting or isn’t brewing, check if the cord is plugged correctly, the power switch is not turned on, or the power outlet has an issue. Once you confirm they are okay, apply these troubleshooting tips:

1. Check the power outlet

The start button may be fine, but there is a problem with the power supply. If the power switch is off, ensure it is turned on and has a stable power supply. You can check its power voltage by connecting another electrical device; if it does not turn on, the socket has an issue. Contact your electrician to diagnose the problem and fix it.

Alternatively, you should check the circuit breaker. Ensure that Mr. Coffee’s ON/OFF switch is turned ON and in good condition. You should also check whether the power cords are in good condition and, if not, consult a repair technician to fix it.

READ: Troubleshooting a West Bend coffee maker that is not working

2. No water in the reservoir

Your coffee maker won’t brew because it does not have enough water in the reservoir. The machine will beep but not brew because the water reservoir is empty.

You can check the water level at the gauge before the coffee maker. If there is no or little water, add some more and try to brew your coffee again.

3. Defective thermostat

A faulty thermostat will prevent your coffee maker from brewing. It is firmly sealed with a metal clip and looks like a small white part. To test the condition of the thermostat, you can use a multimeter to test its terminals. 

If you read no continuity on the terminals, the coffee maker’s thermostat is faulty and needs immediate replacement. Contact a professional repair technician to fix it. 

4. Faulty control board 

Your Mr. Coffee Iced coffee maker may be in service for a long time, exposing the control board to wear and tear. As a result, your control board gets damaged and fails to start the coffee machine. 

Fixing a control board is a complex job and not recommended to do on your own. Instead, you should allow a professional technician to replace the control board.

READ: Can I use Verismo pods in a Keurig?

5. Dirty coffee maker

If your coffee maker fails to start, it is clogged with dirt and minerals from your tap water. You, therefore, need to descale the machine to get rid of the mineral deposits. The manufacturers recommend that you descale your coffee maker after 40 to 80 brews.

Below are steps on how to descale your Mr. Coffee Iced coffee maker:

• Pour 4 cups of white vinegar into the water reservoir.
• Place the coffee filter in the brew basket and secure the lid shut.
• Allow three cups of vinegar to flow through the basket and into the mug placed on the cup holder. 
• Turn off your coffee machine.
• Wait for the machine to rest for 30 minutes before turning it on. Then, let the one cup of vinegar flow through the basket and into the mug.
• Pour the vinegar and thoroughly rinse the mug. Remove the filter from the coffee maker’s brew basket.
• Pour one cup of clean water into the reservoir and put a mug under the brew basket. 
• Turn on your coffee maker so the clean water can rinse the residual vinegar in the machine.

You can also clean your coffee machine off the coffee beans residue and mineral build-up. It is recommended that you clean its interior and exterior once a month using the following steps:

• Make a vinegar solution by mixing one cup of distilled white vinegar and one cup of warm water.
• Remove all the detachable parts of the coffee maker and separately wash them.
• If you clean them using soap, ensure that you thoroughly rinse and dry them before reassembling them to the machine.
• Pour the vinegar solution into the coffee’s water reservoir and run a regular brew cycle. 
• Once the brew cycle is complete, run a clean water cycle to rinse the solution.
• Wipe the coffee maker’s exterior with a damp microfiber cloth before brewing a fresh cup of coffee.

6. Wrongly positioned filter 

There is a chance that your Mr. Coffee maker is not working because its filter is wrongly positioned or unbalanced. To fix this, open the lid at the top of the coffee maker and adjust the filter’s position. 

If you have tried the above and the coffee maker fails to start, the filter is faulty and needs immediate replacement. You can find a new filter at a home appliance or hardware store and get a repair technician to replace it. 

Final words 

Mr. Coffee Iced Coffee Maker is a fast and convenient machine that starts your morning with a hot and fresh cup of coffee. However, there are instances where your coffee maker won’t stop blinking or start because of certain technical issues. Most problems are fixable by resetting the coffee machine, cleaning, or descaling it.

Other problems that involve damaged or faulty coffee machine components, such as the thermostat, need to be replaced by a professional repair technician. Finally, remember to maintain and take good care of the coffee made by regularly cleaning and descaling it of dirt and mineral deposits.

READ: How to unclog a Starbucks Verismo machine

The post Fix: Mr. Coffee Iced Coffee Maker’s start button is not working appeared first on Home Gadgets.

Like any other electrical appliance, the coffee maker can malfunction. If your West Bend coffee maker is not working, you can troubleshoot its issues as explained here.

Troubleshooting a West Bend coffee maker

These are the main issues that you may encounter when using your coffee maker and how you can fix them.

West Bend coffee maker doesn’t heat

Your coffee maker is not heating probably because of a blown fuse, faulty thermostat, defective power cord, or the heating element doesn’t work.

The heating element is located at the bottom of the heating plate and its role is to boil water. When it has been in use for a long time, it wears out and may short-circuit when it comes into contact with water. Check whether the heating element is burnt and if so, contact a professional technician to replace it.

Another possible reason is that its thermostat has malfunctioned. The thermostat is responsible for controlling the operation of the coffee maker’s heating elements. You should remove and replace it or contact a technician to do it for you.

READ: The best low acid coffee brands

The coffee maker is not pumping water

Your West Bend coffee maker is not pumping water likely because of a clogged pipe or a defective heating element. One of the main issues that cause the pipe to clog is the limescale and mineral build-up from hard water.

To unclog the coffee maker, mix water and vinegar and turn on the coffee maker. Run the coffee maker until the solution that drains is clear. Run another clean water cycle to remove the remaining vinegar solution from the coffee maker.

To prevent the pipe from clogging, use soft water instead of hard water to brew your coffee. Hard water contains minerals that clog the pipe and prevent the coffee maker from pumping water. You should also descale your coffee maker after every three months to remove thick layers of minerals deposited in the pipes.

Alternatively, you should also check the coffee maker’s thermostat and timer. It may short circuit when it comes to contact with water. Use a multi-meter to test its continuity and if the reading is beyond zero to infinity, the thermostat is defective and requires replacement.

How to use a West Bend coffee maker

Make sure to clean your coffee maker thoroughly before using it for the first time. For the best results, you should use the medium coarseness setting. Otherwise, the powder-like coffee ground may cause the basket to flood.

• Use a standard cup to measure the cups of coffee to be brewed. Remove the basket and stem and fill the coffee maker with cold water to your desired level. You can use the cup markings inside the coffee maker as a guide.
• Place the stem into the heating unit at the bottom of the coffee maker, then put the basket on the stem. Evenly sprinkle the recommended amount of ground coffee into the basket. Use the chart for reference.
• Cover the lid back on the coffee maker. Ensure that the lid is turned clockwise until securely locked in the handle slots to reduce coffee spills.
• Connect the cord to the coffee maker and plug it into a power source of 120V.
• Each cup of coffee takes one minute of brewing time, after which it stops perking automatically.

Once the coffee maker has finished brewing, use a hot pad to remove the lid, stem, and basket carefully. It is because the coffee and grounds are hot. If you don’t remove them, bitter oils from the coffee grounds will leak into the coffee.

As long as the coffee maker is connected to the outlet, coffee will remain at serving temperature. When you have finished serving coffee and the carafe cools down, wash the coffee maker with warm and soapy water. Dispose of the coffee grounds and coffee filter after every brewing cycle since they form mildew afterward and cannot be reused.

READ: How to clean stubborn stains on a glass cooktop

How to clean a West Bend coffee maker

It is important to clean a coffee maker after every cycle. In addition, the West Bend coffee maker parts such as the lid, reservoir, coffee basket, and heating unit need thorough cleaning on a regular basis. Cleaning it ensures that you get rid of the remaining coffee grounds and build-ups in the basket.

Follow these steps to clean a West Bend coffee maker:

• First, disconnect the coffee maker and let it cool.
• Next, wash the basket, lid, and stem with warm, soapy water and a dishcloth.
• Dry everything with a dry cloth.
• Remove stubborn coffee stains on the bottom of the lid or stem with a damp cloth.
• Fill the water reservoir with one-third of hot clean water. Add a small amount of liquid dishwasher detergent and wash it with a dishcloth or sponge.
• Clean the heating unit properly with a scouring pad to eliminate coffee residue. Twist the pad inside the heating unit to clean it thoroughly.
• Once you have completed the above step, drain and rinse inside. Clean the faucet in running clean water while moving its handles up and down.
• Drain the water from the coffee maker and dry it with a cloth. Clean its outside with a damp cloth and dry it with a soft clean cloth.

With the tips above, you should now be able to troubleshoot and fix your West Bend coffee maker that is not working.

The post Troubleshooting a West Bend coffee maker that is not working appeared first on Home Gadgets.

Your Nespresso machine may be blinking orange to indicate different technical issues. Whether it is a Nespresso Next or Vertuo, the reasons behind this error are similar and that means the solutions are pretty much the same.

Why is my Nespresso coffee machine blinking orange?

The Nespresso coffee machine is inbuilt with special light-based indicators that alert the owner when experiencing a technical issue. 

The orange light-based indicator is found in Nespresso Vertuo Next, Vertuo, and Evoluo. We shall explain some of these issues and the solutions to them.

The orange light might mean different things depending on the way it is flashing.

The Orange light is flashing three times 

When the orange light is flashing three times per second or continuously, the coffee machine requires descaling. 

Descaling is thoroughly cleaning the coffee machine, including its reservoir. It is recommended that you descale the Nespresso machine after every three to six months.

You should have the Nespresso descaling kit to thoroughly clean the coffee grounds and limescale deposits in the reservoir. 

Below are the steps to descale a Nespresso coffee machine:

1. Unplug the coffee machine from the mains power supply and let it rest for three minutes then plug it back.
2. Open the machine’s lid and eject any used capsule. Ensure that the lid is closed and the knob is in the unlocked position.
3. Eject and empty the capsule tank, drip tray, water reservoir, and cup support. Rinse them all before reassembling them back in the machine.
4. You can prepare a descaling solution by pouring half a liter of clean water and Nespresso descaling solution into the water tank. 
5. Put the machine in lock mode and turn it on by pressing the top button. Unlock the machine and then close it. When the machine is preheating, the button will flash for a few seconds before turning solid.
6. Press and hold the button for seven seconds to enter the descaling mode. You have 45 seconds to begin the descaling procedure.
7. Place a large cup under the coffee spout to collect the machine’s content.
8. Lock the Nespresso machine and press the ON button. When the first descaling process is complete, the machine will automatically stop. During the entire process, the orange light will blink rapidly and continuously. 
9. Empty and clean the water tank, drip tray, and capsule container.
10. Pour fresh water into the water tank. Reinstall the water tank, drip tray, and capsule container to the machine and repeat the descaling process.
11. Once the button stops blinking quickly and becomes steady, the descaling process is complete. Let the machine dry for ten minutes before brewing coffee. Pour the rinsing water, refill the water tank with fresh water and reattach it to the machine to start brewing.

If the Nespresso coffee maker is still blinking an orange light after descaling, contact the Nespresso customer service for further assistance. 

The orange light is blinking twice

When the Nespresso Vertuo is blinking an orange light two times per second, it means that it requires cleaning. The machine’s capsules may be blocked and require to be cleaned. 

Below are the steps to follow when cleaning the Nespresso coffee machine:

1. Open the coffee machine’s head and remove used capsules.
2. With a moist paper towel, clean the machine’s parts and the areas around the ejected capsules.
3. Empty the reservoir, rinse it, and then fill it with fresh water.
4. Rinse the cup holder and place a large mug under the coffee spout. 
5. Empty the capsule container and clean it with tap water. Close the head into the locked position by pushing the lever to the far left.
6. Begin the cleaning cycle by pressing and holding the button. The orange light will flash as water flows out for two minutes. 
7. Rinse the reservoir and repeat step 6 three times.

Suppose the orange indicator keeps blinking, press and hold the button for seven minutes. If it persists, you should run the descaling procedure before contacting the Nespresso customer service. 

The post Nespresso is blinking an orange light? How to fix appeared first on Home Gadgets.

When you descale your Cuisinart SS-10 coffee maker, you will be getting rid of metals, rust, salt, and other substances that may have settled inside during use.  The best thing about descaling is that it won’t take much of your time. Simply follow the steps provided here.

What does descale mean on a Cuisinart coffee maker?

Water contains natural minerals such as calcium and magnesium. When you brew your coffee, these minerals leave ugly scaly deposits on the coffee maker’s surfaces. Even though they are not dangerous, they may decrease the coffee maker’s performance. 

Descaling is important because it improves the coffee maker’s performance. It also helps in maintaining its heating elements and internal parts. 

READ: How to reset the Nespresso Vertuo

Cuisinart manufacturers recommend performing the descaling procedure every three to six months. If you are using hard water, you should descale it more often to get rid of the calcium deposits.

Unlike any other coffee maker, the Cuisinart coffee maker has sensors that detect when limescale buildup interferes with the coffee maker’s performance.

It will display ‘DE-SCALE’ on the control panel and require that you descale the machine. You can, however, descale the coffee maker even when the alert is not displayed on the screen.

A flashing light may also alert you that you should descale or clean a Cuisinart coffee maker K-Cup side.

How to descale a Cuisinart SS-10 coffee maker

You can descale a Cuisinart coffee maker using a vinegar solution. White vinegar is the best cleaning agent that cleans off any scaly or calcium deposits. You will also require a wet rag or paper towel and tap water.

Below are the steps on how to descale a Cuisinart coffee maker with vinegar:

1. Empty the reservoir. 
2. Turn off the AUTO OFF and OFF TIME features.
3. Remove any capsule in the brewing chamber before starting the descaling procedure. 
4. Pour two and a half cups of white vinegar and five cups of tap water into the reservoir.
5. Place a large mug or bowl on the drip tray. Press and hold the HOT WATER and RINSE buttons simultaneously to begin the descaling process. 
6. When the reservoir is empty, pour out the content in the mug.
7. Repeat step five until an ADD WATER alert appears on the control panel.
8. Rinse the water reservoir completely and fill it with fresh water.
9. Repeat step five until the ADD WATER alert is displayed on the control panel.
10. In some cases, you may need to perform an additional Hot Water cycle to get rid of the remaining vinegar taste by adding fresh water and pressing the HOT WATER button until the reservoir is empty.

READ: How to descale a Nespresso Delonghi

Why is DESCALE still showing on the control panel?

You have performed the above descaling process, but DESCALE is still displayed on the control panel. This means that there are remains of calcium and limescale deposits in the coffee maker.

You can clean them using these two solutions:

• Press the HOT WATER button for six seconds to reset the coffee maker. If this does not work, press and hold the HOT WATER and RINSE buttons simultaneously to eliminate the descaling message.
• You can also turn off the machine and unplug it from power for 30 to 60 minutes. Plug the coffee maker back to the mains power supply and check if the descaling light is off. If it is not, you should contact Cuisinart customer service for further assistance. 

Get your Cuisinart coffee maker brewing again

The reason why your Cuisinart coffee maker requires descaling is to remove the scaly calcium deposits that form when brewing coffee. Descaling is an easy and quick process that improves the coffee maker’s performance and coffee taste. 

If you have performed the above procedures and the DESCALE message is still displaying on the control panel, you should contact Cuisinart customer service to troubleshoot the problem.

READ: How to clean a Panasonic water boiler

The post How to descale a Cuisinart SS-10 coffee maker appeared first on Home Gadgets.

If your coffee tastes stale or bitter, it means that your machine requires descaling. In this article, you will learn how to descale the Nespresso Delonghi machine. You will also learn tips on how to maintain your Nespresso to prevent clogging. 

Why should I descale my Nespresso Delonghi?

You should descale your Nespresso machine if you want to extend its serving time. It also helps get rid of limescale, which clogs in the machine’s pipes and causes them to wear out quickly.

Calcium may also build up in the machine’s pipes from heating tap water. The build-up makes the machine slow and gets rid of the coffee’s taste. It is, therefore, best that you descale your machine every two to three months to make it run smoothly.

READ: How to troubleshoot a Starbucks Verismo coffee machine

How often should I descale my Nespresso Delonghi?

The Nespresso manufacturers recommend that you descale after every three months or 300 cup servings. 

Before descaling, you must have a Nespresso Descaling Kit that clears the build-up. You can also use vinegar, though it isn’t recommended since it may damage your coffee machine.

How to descale a Nespresso Delonghi

Descaling a Nespresso Delonghi machine takes about 20 minutes. The procedure is, however, easy and fast. You can choose to use the Nespresso Descaling kit or a vinegar solution to descale your coffee machine. 

How to use a Nespresso descaling kit

Below are Nespresso Delonghi descaling instructions using a Nespresso Descaling Kit:

• Remove the capsule and close the lever.
• Clear the drip tray and capsule container and reinsert them. Remove the cup support before starting the descaling process.
• Remove the water tank and descaling pipe at the back of the coffee machine.
• Connect the pipe to the steam connector on the right side of the machine. Once complete, the espresso button will blink white while the descaling button will blink orange.
• Fill the water tank up to two-thirds water level and pour one packet of Nespresso descaling solution.
• Place a large mug or bowl under the coffee outlet to start the descaling process.
• Press and release the espresso button when the descaling solution begins flowing out of the coffee outlet. During the entire process, the descaling indicator light will blink orange and the espresso button will blink white when the descaling process is complete.
• Rinse the water tank, refill it with fresh water and reinsert it back into the machine. 
• Empty the capsule container and drip tray and then reinsert them. Place the large mug under the coffee outlet and start the rinsing cycle.
• The Nespresso machine will automatically turn off when the rinsing process is complete. Get rid of the rinsing water. 
• Drain the contents from the capsule container and drip tray and rinse them before reinserting them. Next, rinse the descaling pipe and store it in its kit. 
• Refill water into the water tank and reinsert it into the machine. Let the coffee machine dry and rest for ten minutes.

How to use vinegar to descale a Delonghi Nespresso coffee maker

Another alternative is descaling Nespresso Delonghi with vinegar solution. To make the vinegar solution, mix one cup of vinegar and one cup of fresh warm water. Let the mixture rest for five minutes to mix completely. 

The descaling process is the same, the only difference being that you are substituting the descaling solution with the vinegar solution. You also need to run four to five rinsing cycles to get rid of the vinegar solution completely.

READ: The best low acid coffee brands

It should be noted that using vinegar solution as a descaling solution may harm your coffee machine and should not be used frequently. The solution can corrode the pipes and their internal parts.

How to prevent build up in your Nespresso Delonghi

Limescale and calcium are present in hard water. You can, however, avoid them by using distilled water instead of tap water to brew your coffee. Also, do not leave used grounds in the Nespresso machine after brewing to prevent unnecessary growths and buildups. 

Descaling and deep cleaning the machine is also an alternative that helps in reducing build-ups in the coffee machine’s pipes. You can clean it daily, weekly, or monthly, depending on your cleaning routine.

Use water filters to filter limescale and calcium out of the water. You can purchase them from online shopping sites or your nearest store. If you think that filtered water will get rid of the coffee’s taste, it won’t. Filtered water makes the coffee taste great.

Note that like any other electric appliance, the Nespresso Delonghi machine also requires regular servicing to extend its life and performance. Descaling is one of them.

The post How to descale Nespresso Delonghi appeared first on Home Gadgets.

In such cases, you need to know how to reset the Nespresso machine if you want to restore it to factory settings or there is an error while using it. In fact, resetting is often part of its troubleshooting procedures.

Resetting the Nespresso machine sounds like a long and dreadful process when in fact it’s not. It is very simple and straightforward. In this article, we will explain why you need to reset the Nespresso Vertuo machine and how you can do so. 

Why reset your Nespresso machine to factory settings?

Unlike the other Nespresso models, the Nespresso Vertuo has additional features that allow you to modify settings such as temperature, cup size, and amount of milk foam. Perhaps the settings are not to your liking and you would like to change them. In this case, you need to reset the Nespresso Vertuo to default settings.

You may need to reset your Nespresso machine to default settings after the descaling or cleaning cycle. Note that all your customized settings will be lost when resetting your machine.

How to reset Nespresso Vertuo machine

The steps to restoring this machine to factory resetting are easy and simple. The Nespresso Vertuo Original, Vertuo Next, and Vertuo Plus share the same resetting procedure. Once the resetting process is complete, your coffee machine will return to default factory settings. 

Below is a step-to-step procedure on how to do it;

• Switch off the Nespresso Vertuo machine by pushing the lever for three seconds.
• Push down the lever and the button simultaneously for three seconds for the machine to enter into ‘Factory Settings Mode’. An orange indicator light will blink when you do this. 
• Press the lever three times to choose ‘Reset to factory settings.’
• Press the button to confirm. On a VertuoPlus, the orange light will blink three times at two-second intervals. After some time, it will change to a steady green light which means that the machine is reset.
• For Vertuo Next, the blinking orange light will turn to a steady white light. 
• For the Vertuo Original, the button will blink an orange light five times.

In conclusion

Nespresso machines are simple and easy-to-use coffee machines that readily prepare your favorite cup of coffee. You may be required to reset your Nespresso Vertuo machine in case of an error signal, descaling, or a cleaning cycle. You may also want to change the machine to default settings. 

Resetting the machine is an easy process that will get you your perfect cup. The Nespresso Vertuo models (Vertuo, Vertuo Next, and VertuoPlus) have the same resetting process. Your perfect cup of coffee is only seconds away from perfection.

The post How to reset the Nespresso Vertuo appeared first on Home Gadgets.

It can be frustrating when the Nespresso Vertuo Next isn’t working as it should. Even worse, the issue might surface in the morning when you need that one cup of hot coffee before heading to work.

If you are reading this, you are probably experiencing a problem with your Nespresso Vertuo Next machine. Here, we have explained why your Nespresso Vertuo Next is not working and how you can troubleshoot it.

Nespresso Vertuo Next is blinking orange

The orange light on a Nespresso Vertuo can mean different things. First, it may indicate that the coffee machine may be unlocked. In this case, you need to lock it by pushing the lever towards the left until it successfully clicks shut.

If the orange light blinks for one and a half seconds and then goes off for half a second, it means that the water tank is empty. So ensure there is enough water in the tank before you start brewing.

If the machine blinks three times in a second, it needs to be descaled. It would help if you descaled it every three months or after 600 servings of coffee cups.

Read: Starbucks Verismo coffee machine troubleshooting

How to descale a Nespresso Vertuo Next

• Remove and empty the drip tray and capsule container, then return them to the machine.
• Pour 1 unit of Nespresso descaling liquid and half a liter of water into the water tank and return it to the coffee maker.
• Close and lock the machine, then press the ON button. The blinking light shows that the coffee maker is heating up, and once the light is steady, the Nespresso Vertuo Next is ready.
• Open the machine head and remove the capsule.
• Close the coffee maker again and leave the lever unlocked.
• Press and hold the button for seven seconds until the steady light goes off and the coffee machine starts blinking orange.
• In the descaling mode, you must lock the coffee maker towards the left. Press and hold the button for about seven seconds before it starts blinking orange again.
• Put a large mug or container under the coffee outlet to begin the descaling process.
• Lock the Nespresso Vertuo and press the ON button. When the first descaling process is complete, the machine will automatically stop. During the entire process, the orange light will blink rapidly and continuously.
• Empty and clean the water tank, drip tray, and capsule container.
• Pour fresh water into the water tank. Return the water tank, drip tray, and capsule container into the machine and repeat the descaling process.
• Once the button stops blinking quickly and becomes steady, the descaling process is complete. Let the Nespresso Vertuo Next dry for ten minutes before brewing coffee. Pour out the rinsing water, refill the water tank with fresh water and reattach it to start brewing.

If the above steps do not work, contact the Nespresso Customer Service for assistance or further instructions.

If the coffee machine blinks twice in a second, it means that it does not recognize the capsule. In this case, you should clean it to remove the residue from the capsule recognition system.

How to clean the Nespresso Vertuo Next

• Open the machine head and remove the used capsule. Wet a clean cloth with warm water and wipe the capsule container and drip tray.
• Close the head far towards the left until it is locked. It should be noted that there should be no capsule in the machine when the cleaning starts.
• Empty and clean the water reservoir and pour fresh water into it.
• Clean the cup support and place a large mug under the coffee spout.
• Empty the capsule container and rinse it with cold water before returning it. Lock it by pushing the lock to the far left.
• The cleaning process involves pressing the button three times within two seconds. Water will flow out of the machine for about five minutes. Repeat this process three times to completely clean it.

If the Nespresso Vertuo Next blinks five times in ten seconds, it must be reset to factory settings.

Read: How to clean and descale a Verismo coffee maker

How to factory reset a Nespresso Vertuo Next

• Open the machine head and remove the used capsule while the Nespresso Vertuo is still on with a steady light.
• Close the head and leave the handle unlocked.
• Press the button five times in three seconds. The machine will blink an orange light five times and later change to a steady white light.

If your Nespresso Vertuo is pulsing orange, whereby it fades from on and off, it means that it is overheating and needs to cool down. Please press the button for three seconds to switch off the machine, then press it again to turn it on. Let it cool from twenty minutes to one hour. If the pulsing continues after this, press the button for another seven seconds to see if it stops.

Nespresso Vertuo Next is not turning on

The Nespresso is not turning probably because it is not connected to the primary power source. Ensure that you check the mains, wires, fuse, and plug to ensure they are connected and in good condition.

You can also push the button or unlock it to see if it works. If there is no change for more than five minutes, contact the Nespresso Customer Service for assistance.

Nespresso Vertuo Next Shows a solid white light

When a solid white light appears on your Nespresso Vertuo Next, the coffee maker won’t function most of the time. It is hard to pinpoint a particular issue in most cases, therefore it is not a simple issue to troubleshoot.

In some cases, unplugging and plugging back the machine can solve the issue. However, in some cases, you just need to contact the company and they may offer a replacement link in this particular case.

Read: Jura Smart Connect 72167 makes your automatic coffee machine smart 

The post Nespresso Vertuo Next Troubleshooting appeared first on Home Gadgets.

If you are reading this, you may have experienced one or more issues with your Verismo machine.  Would you like to find Verismo troubleshooting techniques and make sweet and hot coffee? This article will explain the most common Verismo problems, their solutions, and tips on how to maintain your coffee machine.

How to unclog a Verismo machine?

Failing to clean a Verismo machine may result in it getting clogged. It is highly recommended that you clean it either on a daily, weekly, or monthly basis. When cleaning on a daily basis, rinse the machine once after use before turning it off.

On a weekly basis, rinse the machine only once and switch it off. You should then remove and empty the drip tray and water tank. Clean the unit with a moist and soft cloth. The removable units must be hand washed with detergent and a dry soft cloth. You can then assemble the parts together.

Starbucks advises that you should clean your Verismo machine after every month or after brewing 20 to 30 beverages. The steps to cleaning the Verismo machine on a monthly basis are as follows:

• Raise and close the handle for the pod to fall in the bin, after which the water tank can be removed.
• Mix a full bottle of Urnex Full Circle descaling and cleaning liquid with fresh water into the reservoir up to the maximum fill line.
• Reattach the reservoir, put a mug or a bowl on the drip tray, and rinse until the water tank is empty.
• Remove the water tank, clean it and fill it with fresh water. Return it to the machine and repeat the rinsing step twice until it is empty.
• Wipe the Verismo machine with a moist cloth, clean out the bin and reattach the reservoir.

Why is my Verismo frother blinking red?

The Verismo button blinks red because the brewer requires to be descaled. This mainly occurs in Verismo model V. The machine should be descaled after every three months using either the Urnex Full Circle or Durgol Swiss Espresso decalcifier.

Here’s how to descale a Starbucks Verismo coffee machine:

• Raise and close the handle to detach the water tank.
• Mix a full bottle of Durgol and 12 ounces of fresh water into the reservoir at a half-full level.
• Reattach the reservoir to the machine and rinse. Repeat this rinsing step until the water tank is empty.
• Remove the water tank, clean it and fill it with fresh water. Return it to the machine and repeat the rinsing step twice until it is empty.
• Wipe the Verismo machine with a moist cloth, clean out the bin and reattach the reservoir.

For older Verismo versions, that is versions 580, 583, and 600, the red and green light simultaneously blinking indicates that the machine is overheating. There is no need to descale the brewer. If the button continues blinking even after descaling, contact Starbucks customer service.

Starbucks Verismo coffee machine has lost its prime

Another Verismo problem is when the machine has lost its prime on its pump. It restricts water from flowing through it. The steps below describe how to prime a Verismo machine:

• Switch on the Verismo machine but the brew and steam switches should be off.
• Put a large cup or bowl on the steaming wand and open the steaming valve.
• When the valve is opened but the boiler is not warmed for steaming, the pump will start and prime the pump.
• Once the water has continuously flown from the wand for a maximum of five seconds, close the steam valve. You can then heat water to steam or brew.

The Starbucks Verismo coffee machine won’t brew

The coffee machine may fail to make hot coffee because you do not have the general cycle. It is therefore advised that you regularly clean the cycle so that the machine heats properly and remains clean. Maintain temperatures between 175-180 degrees Fahrenheit.

You can also make your coffee hotter by running one brew cycle excluding the pod so as to preheat the coffee machine efficiently. Another way of making hot coffee is by rinsing the mug with warm water before brewing your coffee.

Read Also: List of the best low-acid coffee brands

Verismo is not pumping water

There are reported cases where water is not coming out of some brand-new Verismo coffee machines. You need to give the machine some time before it dispenses water.

If you have correctly set up the Verismo, followed the manual’s instructions and nothing has happened after 2-3 minutes, then its dispensing unit is experiencing a technical problem.

There are two solutions in case this happens.

• You can either pump a top stainless-steel handle about 20 to 30 times to lessen the machine’s stiffness.
• You can also request a replacement machine from Starbucks.

If either of these methods does not work, you can call Starbucks customer service for assistance.

Verismo produces a sour milk smell

The Starbucks Verismo coffee machine may produce a smell like that of sour milk because of the milk pods. Starbucks advises that you rinse the machine after brewing the milk pods because milk comes into contact with every unit in the machine. Never use milk in the water reservoir since it will damage the machine.

There is a special dairy cleaning solution called Rinza that is recommended for cleaning the machine when the smell has developed. It should only be used on steam wands and milk frothers.

To be on the safe side, it is urged that you avoid using milk pods in your coffee machine.  Alternatives for milk pods are coffee pods and real milk. They brew better coffee, maintain your machine for a long time, and smell much better. When you’re done brewing your hot coffee, pour fresh milk directly into the cup.

If your Starbucks Verismo coffee machine is not working or the problem is not highlighted here, you should contact Starbucks customer service for further instructions. They are available from Monday to Friday from 6 a.m. to 3 p.m.

The post Starbucks Verismo Coffee Machine Troubleshooting appeared first on Home Gadgets.

Well, don’t worry. This article will teach you different ways to unclog and clean your Starbucks Verismo machine to keep it functioning flawlessly for a long time.

The first sign of a clogged Verismo system is water not coming out while the pump is humming. This indicates the presence of sediments and other foreign objects on the water path. Also, scaling can cause issues when left unattended.

How to unclog your Starbucks Verismo machine

The best thing to do is to troubleshoot your Starbucks Verismo machine using the following solutions.

1. Clear the water path

Start by forcing water into the intake tube while the pump is running. You can use a turkey baster or nose/ear bulb.

This will help to push whatever is clogged through or trigger the pump to start sucking the water on its own. If it doesn’t work on the first trial be patient and try again.

Read Also: Starbucks Verismo V review

2. Run a steam cycle

Steam helps a lot when it comes to unclogging a Verismo Machine. You just need to fill a cup with water then immerse the steam wand into the frother.

Next, go to the steam selector knob and turn ON “Steam”. Let the water froth for a couple of seconds.

In case the nozzle doesn’t steam, turn OFF the “Steam” setting, take a straight pin and use it to clear dried milk from the nozzle.

3. Steam nozzle cleaning

This solution also helps when water is not coming out from a Verismo Machine.  It involves the following steps:

• Remove the steam nozzle sleeve.
• Fill the pitcher with cold water.
• Turn the selector knob to “Steam”.
• Submerge the steam nozzle into the pitcher and let the steam run through it for 30 seconds.
• Do this three times.
• Turn Off the Steam knob.
• Wipe the steam nozzle dry with a soft cloth.

4. Clean the brew unit and filter

To clean the brew unit and filter, start by removing the waste unit from the machine while holding the handle of the brew unit. Next, press the release button and pull out the brew unit. Use warm water and a clean sponge to clean the brew unit.

Do the same for the permanent filter in the funnel. Dry all the parts and put the brew unit back.

5. Descale the machine

Descaling is usually the most recommended solution when a Starbucks Verismo machine stops working. It’s an efficient method of removing build-up that could be clogging the system. The steps to follow in this case are:

• Lift the machine’s handle and close it to ensure there’s no pod.
• Fill the water tank with clean water.
• Add a descaling agent (preferably the one recommended by the machine’s manufacturer).
• Close the water tank.
• Go to the program selector and pick “Program”, then look for “Descaling” on the menu and select it. Finally, press “Begin” or “Start”.
• Place a container under the water nozzle.
• After descaling, flush the machine’s system with plain water to remove any residues that may have stuck around. Fill the tank with clean water and press the dedicated rinse button.
• Repeat the rinsing process for a more thorough cleaning and ensure the tank is empty when you finish.
• Lastly, wipe the machine with a soft cloth.

NOTE: It’s recommended to rinse and clean your Starbucks Verismo machine once every day after using it, rinse and handwash the removable parts weekly, clean monthly with the right descaling liquid, and descale once every three months.

Conclusion

With all these solutions, it should be easy to unclog a Starbucks Verismo if it stopped working.

But, if none of them works, then you might be dealing with a bigger issue that requires the expertise of a certified technician. So, reach out to the Starbucks Verismo support team and let them know about your problem.

The post How to unclog a Starbucks Verismo machine appeared first on Home Gadgets.

The Verismo V is an attempt to bring Starbucks drinks straight to your kitchen or office by giving you a sizable machine that creates all the basic drinks and the delicious foamed milk that makes Starbucks latte so captivating.

As a small-sized gadget for your kitchen, the Verismo V will neither break your bank nor clutter your kitchen. It is surprisingly affordable and compact. This coupled with the sleek design makes a marvelous piece that will definitely contribute to your kitchen’s decor.

Even though the Verismo V is smaller and lighter than its predecessor, it still brews its espresso and coffee from pre-packed plastic pods, something that would almost be unacceptable to people who like grinding their own coffee and brewing it using pour-over coffee brewers.

Design and appearance

Many of the looks and design features trickle down from the predecessors, Verismo 583 and the Verismo 600. You’ll get the same 19 bar pump pressure, a removable drip tray, and somewhere to stash your used pods.

A see-through water tank sits to the side of the brewer system and will hold 77.7 ounces of water, a great improvement to the previous models’ 33.8 ounces capacity.

The control buttons sit at the very top of the coffee maker making them easier to access without bending. Its profile stands at 11” tall and 7.6” wide making it ideal for the kitchen countertop.

Read Also: The Nespresso Vertuo Next is flashing an orange light

Setting up and getting started

The Starbucks Verismo V brewer system comes ready to use. Attach the water tank and plug the coffee maker into a power outlet before lifting the cover to the coffee slot. Take one pod and open the pressure tab covering the bottom.

Drop in the plastic pod into the slot, cover it up and press the button designating the espresso you want and the Verismo V will have it ready within 13 seconds.

Your espresso will have a thick and nice crema and its taste will mostly depend on the age of the plastic pod you used. Ground coffee tends to lose flavor over time hence older pods might taste less appealing.

This coupled with the fact that one pod goes to one cup and you cannot cram in more coffee per brew means that you either have to buy pods with higher amounts of ground coffee or make do with the shallow flavor.

The Verismo V lets you choose the cup size instead of just sending the coffee into the desired 1-ounce cup. You can scale it up to 1.5 ounces if you want.

Brewing coffee is a bit different since you don’t really need the espresso thickness. You can change the volume from the default 7 ounces to an impressive 10 ounces.

The Verismo V milk frother

While the Verismo accepts milk pods, the machine will develop a sour smell after a while no matter how often you run the rinse cycle. The best alternative would be investing in a Starbucks milk frother and using fresh milk to create that creamy additive that makes Starbucks coffee so unique.

Alternatively, you can use the milk frother that comes with the Verismo V. Starbucks has come to terms with the fact that milk pods are a bad idea for your machine and your lattes.

Read Also: How to use the Starbucks Verismo milk frother

Cleaning the Verismo V coffee machine

When it comes to cleaning, one of the most neglected appliances is a coffee machine. It is essential to keep these devices clean for various reasons, but most importantly, keeping your coffee machine clean ensures it lasts longer and you get the best coffee. If you own a Verismo V coffee machine, then we are going to show you the best way to clean it for it to last longer.

This guide comprises a couple of steps that should be carefully followed when cleaning the Verismo V coffee machine. Depending on how often you use the machine, you can either follow these procedures to clean it daily, weekly, or when descaling.

To clean the Verismo V:

• Fill the water chamber in your coffee maker with water and white vinegar.
• Switch it on, let it brew until the chamber is half empty
• Turn it off and let it sit anywhere between 20 and 30 minutes before you power it on again for it to finish brewing
• Add some water again to rinse the machine
• Take off the removable components, wash with a mild detergent, rinse and dry them with a cloth
• You can use rice as an abrasive for gently cleaning the water chamber

How to descale your Verismo V

You can use various Verismo descaling agents for this procedure, though we are going to use one in our case, Durgol. If you are wondering whether you can use vinegar in this instance, then the answer is yes –simply replace Durgol with vinegar then ensure to rinse your coffee make until the vinegar smell is gone. To understand how to descale Verismo V, carefully follow these steps:

• Ensure there is no pod left in the unit by lifting and closing the handle and then taking out the water tank
• Put one bottle (4.2 oz.) of the Durgol descaling agent in the reservoir and mix with 13.5 oz. freshwater
• Return the reservoir and then put a bowl or a large mug beneath the spout and then turn off the Verismo machine
• With the machine off, press both the power on/off and brewed coffee buttons at the same time for two seconds. Be careful not to hold them for too long or press them more than once
• Hit the brewed coffee button to begin dispensing water – it should blink in white color. This rinses the water tank and should be repeated until the tank is empty
• Remove the tank, rinse it and fill it with fresh water. Return it onto the machine and use the brewed coffee button to repeat the rinsing procedure until it is empty
• Wipe the Verismo machine using a soft cloth to clean it out
• Hold the brewed coffee button for three seconds to leave the descaling mode and your machine is ready for use

How to unclog your Verismo machine

If your Verismo has no water coming out, you have a clogging problem in your hands. To deal with this issue, simply follow the descaling procedure. You can use any available descaling agent such as vinegar. To ensure your Verismo machine does not clog again, clean the machine regularly on a daily or weekly basis and descale it after every three months.

Your machine will be free of stains and hard water spots besides mineral build-up and the coffee oils. Most importantly, your Verismo machine will produce rich-tasting coffee for your home or office without any strange odor or funky taste.

How often should you run the rinse cycle?

Keeping your coffee maker clean improves the quality of coffee you get from each brew. The rinse cycle cleans up residual coffee from the machine leaving it fresh for the next run. Running the clean cycle after a couple of brews is wise. The machine will remind you to run a rinse cycle if you stay for too long without cleaning it up.

To run the rinse cycle, place a cup beneath the drip nozzle and punch the rinse button. Ensure that the machine is well heated for an effective rinse. Always run the rinse cycle when you turn the Verismo V on after a no-use period.

Verismo V Compatible Coffee Pods

The Verismo V will use standard Verismo pods. The flavors vary from brewed coffee to tea, espresso, and the now unnecessarily milk pods that were popular in the discontinued Verismo coffee maker models.

Always buy your Verismo coffee pods in bulk to save on cost. You can save up to $0.19 per pod if you buy big 96ct boxes as compared to buying small boxes.

Advantages

• Gives an amazing blend of coffee, espresso, and tea at the mere press of a button
• The provided creamer is a great move from milk pods. It will keep your coffee maker cleaner for longer
• A bigger water tank means you can brew more before replenishing the water tank
• A small and compact design that makes it at home in your kitchen without filling out too much space

Disadvantages

• The pods will limit you. You’re limited to Verismo pods meaning that you will have to pay between $10 and $15 per dozen and stick to the flavors Starbucks deems fit for your coffee maker
• Too many coffee pods to dispose of. This is not really environment-friendly
• The espresso might pass out as too light and a bit flat to those who prefer a very strong brew

The bottom line

The drinks you get from the Starbucks Verismo V definitely remind you of the actual storefront drinks. It is a cool way to skip the long lines and the time-wasting coffee run. You might find the brewing process too manual especially if you want to add cream and frothed milk.

The KRUPS EA8808 does a better job by automatic the entire process as long as you have a jar of milk nearby. The compact size and reasonable price tag not only make it a great addition to your kitchen but also a great housewarming, wedding, or seasonal gift to someone special in your life.

The post Starbucks Verismo V brewer system review appeared first on Home Gadgets.