So, to help you out, we’ll discuss different ways to prevent or get the rust off a soap dispenser and keep it at bay.

The first sign that your soap dispenser is corroding is the formation of a reddish-brown oxide on the metallic parts. You should also watch out for brown stuff coming out of a soap dispenser that results from the rust residue mixing with your liquid soap.

This can be very dangerous.

How to get the rust off a soap dispenser

There are different methods you can use to eliminate rust from the metal parts of your soap dispenser. These are:

1. Using white vinegar

White vinegar is a versatile, natural cleaning agent that would clear any amount of rust build. You simply need to rub the vinegar on the affected area, leave it for a while then wash it.

Better still, if it’s a significant amount of rust, soak the rusted parts in a bowl of vinegar and leave them overnight. After a good soak, remove the metal parts and clean them with dish soap and water.

2. Using baking soda

Baking soda is another reliable rust-removal agent. However, it works best on thin metals and small amounts of rust.

Mix the baking powder with water to form a thick paste then apply the paste on the rusty parts of the metal and leave it for an hour or two. Scrub with a wire brush or steel wool then rinse and dry the parts.

3. Using citric acid

For this solution, add three tablespoons of citric acid to a bowl of hot water then submerge the rusty metal parts of your soap dispenser into the mixture overnight. Remove them and scrub off the rust residue.

Unfortunately, citric acid will also get rid of the paint and other metal coatings.

4. Using a mixture of lemon and salt

Lastly, you can combine lemon’s acidity and salt’s abrasiveness to fight rust. Start by covering the rusted spots with salt then squeeze lemon juice on top and let the mixture sit for at least two hours.

Use the lemon rind to scrub the mixture off then rinse off the residue and dry the parts.

Note: Other detergents that you can use to clean a steel soap dispenser and rid it of rust are Naval Jelly, Metal Glo, and a mixture of dish soap and salted potato.

How to prevent rust on a soap dispenser

Once all the rust is gone, it’s important to make sure it doesn’t build up again. How? By switching to rust-proof metal parts or rustproofing the available parts using the following methods:

1. Spray clear nail polish: Put some clear nail polish in a spray bottle then spray the metal parts to create a protective coating against water. This will make it impossible for oxidation to take place.
2. Use water-resistant paint: Apply water-resistant paint to prevent the metal from reacting with water and oxygen.
3. Use resin: This is another good coating solution. You can use Pure Resin, Resin Glue, or Rustoleum.
4. Using wax: Add raw beeswax to the metallic parts and you won’t have to worry about rust formation on your soap dispenser.

If you own a mason jar, here is a special guide for preventing rust.

Conclusion

From this guide, you have the best solutions to maintain a soap dispenser and prevent rust. This will ensure it stays stylish and functional for a long time.

However, a more permanent solution that can help you avoid all the hassle is getting stainless steel lids and rings because they don’t rust.

The post How to prevent rust on a soap dispenser appeared first on Home Gadgets.

As such you need to figure out how to keep mason jar soap dispensers from rusting. You need not worry this process is as easy as ABC.

How to clean rusted mason jar lids

The first step would be to remove the rust patina from the mason jar soap dispenser lids.

This can be done by sanding the lids or scrubbing them using steel wool. You can also soak them in a lye solution but this would be overkill.

Read Also: What is the best shower soap dispenser?

Rustproofing your mason jar lids

The easiest option would be to switch to rustproof lids but you can also create your own rustproof lids in a few easy steps.

The cheapest way to rustproof your lids is to spray them with a clear nail polish to prevent the metallic part of the soap dispenser from coming into contact with water. You can also use water-resistant paint to rustproof your mason jar soap dispenser lid.

Another way to prevent mason jar lids from rusting is by coating the lid in a coat of resin to protect the lid from oxidation.

You can also use resin glue as buying a whole resin container just for this purpose would be costly. Alternatively, you can use Rustoleum which will help to get rid of the rust as well as create a protective coating to prevent any further rusting from occurring.

You can also use wax to coat the lids and protect them from rusting.

All you need to do is apply a coat of wax and you are good to go. It goes without saying that some of these processes need to be repeated every few months as they are not long-term solutions.

Read Also: How to stop soap pump bottles from leaking

The post How to keep a mason jar soap dispenser from rusting appeared first on Home Gadgets.

Constant dripping not only waste soap but also makes your dispenser rusty and filthy. This is especially if you don’t clean it often.

That said here a number of problems to look out for and fix to stop the dripping.

Read Also: Best shampoo and soap dispensers for showers

Steps to stop a soap dispenser from dripping

• First and foremost, inspect the plastic tube that transfers the soap from the jar to the pump. This is to make sure it is connected to the pump top correctly. If it is loose and it can be fixed, then do so. If not, get a replacement from a used soap dispensing bottle if you are using a countertop soap dispensing bottle. In the case of under the sink soap dispensers, then get a replacement tube. Check to ensure it is for your particular brand and from the manufacturer.
• Next, check to see if the soap has congealed in the spout and clear it. You can do this by soaking the spout in hot water and using a toothpick or other small object that can fit in the spout to remove the soap deposit. Then close the lid and test if it is still dripping.
• Another option is to tighten the sink soap dispenser. The leak could be a result of a loose pump. Try wiggling the pump a couple of times to reset the spring inside the pump that helps to pump the soap. This should help to realign it and prevent further dripping.
• Finally, look into the easiest solution to stop the soap dispenser from leaking from the top. Dilute your soap. If you are using dense soap, then chances are there will always be leftover soap in the spout after you pump that will end up leaking onto your counter.

Read Also: Best foaming soap dispenser

If all these tips on how to fix a soap pump fail or clogging, then chances are your soap dispenser is cracked. In this case, you need to replace it.

The post How to stop a soap dispenser from dripping appeared first on Home Gadgets.