It can be stressful when the washing machine stops working and displays an error code like 3C. the first question that comes to mind is, how do I fix error 3C on a washing machine? Read more to learn what this error code means and the troubleshooting tips to clear it off.

What is the error code 3C on a Samsung washing machine?

It means a washing motor or hall sensor error; hence your washing machine is not working. There may also be a floating drain obstacle, or the drain pump has malfunctioned under a laundry load. These are the possible reasons for the error code in the washing machine:

• Faulty washing motor.
• Faulty washing motor hall sensor.
• Incorrect connections of the motor hall sensor connector.
• Faulty washing motor rotor and stator.
• Faulty main PCB.

Below are the troubleshooting tips that may help fix the problem:

1. Reset the washing machine

The washing machine may be experiencing a system glitch. Therefore, it will give false information to the control panel that the machine is a draining issue. To fix this, you can reset the washing machine by turning it off and unplugging it from the power source.

Let it rest for less than five minutes and plug it back into the socket. The error code 3C should have cleared by switching it off, and your washing machine resumes normal operations.

READ: How to clean an iron that has burnt fabric

2. The washing drum is overloaded

Another reason there is a 3C error code on a Samsung washing machine is that it is overloaded with clothes.

You can fix this by removing some clothes from the drum and starting the cycle again. If this method does not work, unplug it from the socket and let it rest for 30 minutes.

3. Power supply issue

The 3C error code tells you that the motor doesn’t have enough power. It then informs the mainboard that it is not spinning as fast as it normally should.

Ensure that you run the machine and check whether enough power is supplied to the drain pump at the drain portion of the cycle.

4. Broken wire

Aside from an overloaded washing drum or system glitch, the wire in the wiring harness may be broken. It results in an intermittent connection to the mainboard and sends no data from the motor. Depending on the model you are using, you can manually fix this problem with the right wiring harness.

5. Faulty washing motor hall sensor

The hall sensor helps the control board ensure there is normal functioning in the washing machine. It is located on the stator at the back of the motor. When it is damaged, it fails to inform the control board that the motor is spinning and, in turn, stops the washing machine.

If this is the case, replace the hall sensor with a new one. You can do it yourself if you know your way around the electricity and its circuits. You will only require the washing machine’s manual, a digital multimeter, and a few tools.

READ: How do heated apparel work?

6. Faulty washing motor

The motor problems may result from worn-out carbon brushes and strange noises. Use a multimeter to test the motor’s continuity and determine its condition by its reading. Set the multimeter to RX1 and test the two probes of the motor.

If it reads 0 or near 0, it is in good condition. However, if it reads infinity, the motor is faulty and needs to be replaced.

7. Faulty main PCB

The printed circuit board or PCB is prone to failure because of burnt components or defects such as misaligned layers, short circuits, and crossed signals. It may trip the electrics and fail to turn on the washing machine when it fails.

If the PCB is tested to be faulty, it should be replaced with a new one. Once you have completed this, restart the washing machine and test whether the error code has cleared.

8. A disconnected motor hall sensor

Because of a foreign object, the washing motor hall sensor may be disconnected from the motor and the control board. As a result, the drum may be jammed and fail to start the cycle.

You can fix this by looking for the foreign object and removing it through the hole of the heating element. To access the heating element, remove the front panel of the dishwasher.

9. Seek further assistance

You have tried all the above solutions, but the error code 3C persists on display. What’s worse is a continuous loud humming sound from the washing machine.

You should consult a professional technician to troubleshoot the problem and fix it. It is preferred that you contact Samsung customer care to diagnose the problem and fix it.

Final words

The Samsung washing machine is a great home appliance that cleans your laundry loads. Therefore, it is stressful when there is a 3C error on a washing machine and it stops working.

The error code means that the washing machine is experiencing a motor or motor hall sensor problem. It can be caused by overloading clothes, faulty motor, hall sensor, or printed circuit board.

You can diagnose and fix the Samsung washing machine 3C error code by using a multimeter and replacement components. If you cannot do it, or the error code persists, consult a professional technician or Samsung customer service to troubleshoot the washing machine’s problem.

The post How do I fix error code 3C on Samsung washing machine? appeared first on Home Gadgets.

One of the most common ones is the ND error code. So, what does an ND error on a Maytag washer mean, and how do you clear it?

When the ND error code displays on the panel, your clothes may be cleaned in the washing machine. In this article, you will learn what this error code means and how you can clear it off by draining the Maytag Neptune drain pump.

What is the error code ND?

The error code ND on a Maytag washer stands for Not Draining. This means that your washer cannot drain water during its cleaning cycle. As a result, there is dirty water in the drum sometimes, and the washer has stopped spinning.

In addition, a clogged drain pump prevents water from flowing and causing water flooding in the washer.

How do you clear the error code on a Maytag washer?

Now that you’ve understood why an ND error code appears on your Maytag washer, let’s get into the troubleshooting details.

Start by draining the Maytag Neptune drain pump. If it doesn’t work, then check for a clogged or kinked drain hose. If the drain hose is in good condition, check whether a cloth is stuck in the drain pump.

Socks and small clothes sometimes get stuck in the pump during the cleaning or drying cycle, making the washer stop spinning. The cloth may also damage the pump’s impeller, and you will have to replace the whole pump.

READ: How to troubleshoot Maytag washer problems

Where is the drain pump on a Maytag washer?

The drain pump is located at the back of the Maytag washer. Unscrew the panels at the back of the washer, and lift and slide the panels to reveal the drain pump on the left side. Its purpose is to drain all the water from the washer drum and force it out through the drain hose.

Inside the drain pump is an impeller that continually spins when the pump is normally spinning. When the impeller spins, it pulls water from the washer drum and pushes it out through the drain hose. When the drain pump or impeller is ruined, water gets clogged in the drain hose and fills the front washer load.

How do you manually drain a Maytag washer?

Before you inspect or check the drain pump or hose, you must manually drain the water to minimize leaks. Here is how you can manually drain water out of a Maytag Neptune washer:

• Pull the washer away from the wall or any power supply and unplug it from the socket.
• Fetch any remaining water in the washer drum.
• Remove the drain hose from the wall or sink drain and empty the remaining water into a bucket.
• Fix the open end of the drain hose to prevent unnecessary spillage while you troubleshoot the Neptune washer.

How to unclog a drain hose

A clogged drain hose is why your Maytag Neptune washer is not working. There may be kinks or blockages from debris or a trapped piece of clothing obstructing the hose from draining the water properly.

If the blockage is not visible outside the hose, you need to inspect its internal part using the following procedure:

• Unscrew the two mounting screws clamping the washer’s front panel and remove it. Pull out the panel edges before removing the top.
• Place a towel under the drain hose before disconnecting it from the drain pump. 
• Once the water has been drained, check the hose for blockages and remove them with pliers.
• If you cannot see any blockages, separate the hose from the tube end to check and remove any debris.
• Connect the inner hose to the pump and tab.
• Return the washer’s front panel.
• Connect the outer hose to the drain, ensuring that the end of the hose is 30 to 96 inches above the floor for proper draining.
• Connect the Neptune washer to the water and power supply before pushing it back to the wall.

Read Also: How do I fix error code 3C on the Samsung washing machine?

How to clean a drain pump filter

Another reason your Maytag washer is not draining is because of a clogged drain pump filter. When the water drains out of the pump, the pump filter sieves out dirt that may clog the drain pump. A clogged filter prevents water from flowing to the drain pump and out of the washer.

Follow these steps to unclog a drain pump filter:

• First, open the washer’s front panel.
• Next, position a towel under the drain pump filter.
• Gently turn the filter cap counterclockwise while controlling the water flow rate that drains out of the drain pump.
• Remove the pump filter and clean it under running water to remove dirt or debris.
• Using a paper towel, wipe off any buildup on the filter housing.
• Reconnect the drain pump filter and twist it clockwise to secure it.
• Finally, reconnect the washer’s front panel.

Faulty washer components

If the washer still displays the ND error code and is not draining, there may be faulty components. They include the door lock and drain pump.

If so, consult a professional repairer to assist you and help fix the problem. You can also contact Maytag customer service, who will repair the washer if its warranty is still valid.

Fixed the Not Draining (ND) issue on your Maytag washer?

A Maytag Neptune Washer is efficient in washing large or extra dirty loads. However, there are cases where it may fail to drain because of a clogged drain hose, pump filter, or drain pump. You can apply the above troubleshooting methods to drain the excess water from the washer and get the machine working again.

If the error code persists and the water does not drain, your washer has faulty components, such as the drain pump and door look. You should, therefore, contact a professional repairer or Maytag Customer Service to fix your washer and get it draining again.

The post What does ND on a Maytag washer mean? appeared first on Home Gadgets.

You need not worry because this article will explain common Maytag washer problems and how you can fix them. Some of these issues are easily fixed, while others need the help of a professional technician.

We will also explain how to troubleshoot your Maytag washer and fix any issues that may occur.

How to troubleshoot Maytag washer issues

There are several problems you may experience with Maytag washing machines. We shall highlight each issue and provide various solutions to them.

1. Draining issues

Your Maytag washer might not drain its water, or you might retrieve your clothes while they are still wet. It may be that your drain hose may be clogged, the drain hose is incorrectly placed, or you have selected the slow-spin option.

Ensure the drain hose is clogged or kinked by locating it at the back of the washer. You can straighten it out to ensure that there is continuous water flow. 

READ: How to fix a Samsung dryer that is not heating

The slow-spin option from gentle and delicate cycles leaves more water in the load. To reduce the water in the load, choose a cycle that has a high-spin speed as the Normal cycle. 

The drain hose should be set at the set height requirements. It should be at a maximum height of 96 inches and a minimum height of 39 inches from the machine’s base. It is done to prevent water from flowing back into the washer.

2. Spinning issues

The washer needs to spin correctly for your clothes to be fully rinsed and it may fail to do so for some reasons.  Some of the reasons include power failure, an overloaded, or unbalanced wash load, or an unleveled washer. 

If there is a power failure during the spin cycle, the washer does not reach its full spin speed. To troubleshoot your Maytag washer, switch on the spin cycle or drain and spin cycle to empty the remaining water. 

Your load of clothes should be balanced and of the right amount for the washer to spin correctly. Unbalanced and large loads reduce the spin speed and leave the clothes wet.

The washer should be leveled on the floor so that the washer can spin correctly. If not, it will create excessive noise and vibration during its spin cycle.

3. The washer has a bad odor

Your washer may emit an odor that is unpleasant, especially after a spin cycle. It may be because the load has been left in the washer for too long, or you have used too much detergent or fabric softener. 

Ensure that you set up a cleaning schedule for your washer. You can use Affresh washing machine cleaner tablets or any household cleaning items to clean it.

Remove the loads immediately after the cleaning cycle to prevent odors. Transfer them to the dryer after washing to dry them. You should also use the right amount of detergent, which is the first line of a detergent cap for a normal load. It will also prevent wastage of detergent and fabric softener. 

4. The washer is leaking

Your Maytag washer may leak water on the floor from the drain hose. If you notice a puncture or crack on the drain hose, it means that it needs to be replaced with the help of a professional technician. If the drain hose is in good condition, the outer tubs require replacement.

You should also avoid overloading your washer to prevent excess water from filling the washer and leaking it. The drain hose should also be properly attached to the washer to avoid water leakage. The rubber washers should also be tight in place, not missing, and in good condition. 

If the water is leaking from the door, it is most likely to be a door seal issue. All you have to do is wipe the water with a moist cloth to clean off any dirt.

If water continues leaking, there might be something that is blocking the door seal. Check whether there are tears on the door seal and if you find any, the door seal needs a replacement. 

READ: What to do when your Whirlpool washer door is locked and won’t open

5. The washer is noisy 

The Maytag washer may make noises that you are not familiar with. It can be an alert that something is wrong with your machine. There may be clicking or small metallic noises when the cycle begins. The clicking sounds may also be buttons and zippers hitting the washer during the spin cycle.

If you hear rattling sounds or vibrations during the spin cycle, it means that the washer is unlevel or it is overloaded. Make sure that you remove excess clothes if the load is tightly packed. The washer should be evenly placed on the floors so that it is balanced and spins correctly. 

During the spin cycle, you might hear a clunking or thumping sound, which is normal. It occurs when the drive motor turns modes from agitation to full spin mode. If you hear a humming sound, here’s a troubleshooting guide for you to follow.

What is not normal is when you hear unusually loud sounds like metals banging or grinding against each other. If you hear this, contact a professional technician to diagnose the problem.

Wrapping up

Maytag washers are popular in many households and known to serve for a long time if properly maintained. They are, however, known to experience problems when they are used. We have highlighted the most common problems and how to troubleshoot your Maytag washer. 

Some problems such as detergent measurement, leveling the washer, and tightening the drain hose are easily fixed. Other problems such as a cracked or clogged drain hose require that you seek the help of a professional technician. Make sure that you regularly clean the machine to prevent odors and also regularly check whether its internal parts are in good condition.

READ: Ways to fix the ND error code on a Maytag washer

The post How to troubleshoot Maytag washer problems appeared first on Home Gadgets.

That said, it can be confusing when you notice your Whirlpool washer door is locked and the light is flashing. So, to help you understand, we’ve come up with a complete troubleshooting guide.

Why is my washer locked and won’t open?

Some of the reasons your Whirlpool washer door is locked are:

• There is a washing cycle in progress.
• The washer was turned on before being connected to water.
• The control system is faulty.
• Debris buildup along the frame of the washer.
• Damaged door lock.

Troubleshooting a Whirlpool washer door that’s locked and won’t open

There are several fixes you can use to try and get the washer door open. Check them out below.

1. Wait a few minutes

After the washer completes a wash cycle, it takes a few minutes for the door to be unlockable. This is because the motor takes time to stop completely and signal the control board to open the door.

In case you switch off the washer mid-cycle and the door refuses to open, it’s because there’s water in the washer that must drain first.

If you can’t wait, press and hold down the “Control Lock” button for 3 seconds after the washing cycle ends. When you hear a latching sound, it means you can unlock the door.

Read Also: How to fix a fridge door seal that is not sticking

2. Unplug the washer from the power source

You should disconnect power from the wall socket or the breaker box and leave it for a few minutes. This will reset the Whirlpool washer and could get the door to open. Turn on the breaker switch and plug the power cable into the socket then power up the washer. Try to open the door to see if the issue is no longer there.

Also, you can reset the Whirlpool washer by pressing and holding the “End Cycle” button for 5 seconds.

3. Check the lid switch

Considering this is the part responsible for locking and unlocking the washer door, you must inspect it for damage signs.

• First, unplug the power.
• Turn off the water supply.
• Find the lid switch (you might have to check your manual).
• Ensure its aligned and tightened properly.
• Use a multimeter to test for continuity.
• If it’s defective in any way or has no continuity, replace it immediately.
• Confirm if the locking problem is no longer there before you move to the next component.

4. Check the actuator motor

A faulty actuator motor will cause the motor to stop working mid-cycle and this prevents the washer door from opening. Now, to solve the problem, you need to troubleshoot the motor.

• First, put the washer on a cycle and listen for grinding noises from the motor. They prove that the motor is defective and needs a replacement.
• If you don’t hear any noises, unplug the power source and locate the motor.
• Ensure the wires attached to it are in good shape and there are no loose connections.
• Get a multimeter and test for continuity of the motor.
• If it has no continuity replace it.

Read Also: Best foaming soap dispensers

5. Check the drain pump

A faulty or clogged drain pump could be another reason your Whirlpool washer door is locked and won’t open.

To inspect the drain pump:

• Disconnect the power.
• Turn off the water supply.
• Locate the drain pump.
• Confirm if the impellers are able to move freely.
• If they’re stiff, then there’s a problem. You can try to loosen them by clearing debris or unclogging the drain.
• Next, use a multimeter to test for continuity.
• If the result shows no continuity, start looking for another drain pump.

6. Unlock the door manually

Lastly, if none of the solutions work, you’ll have to manually unlock a washing machine door. How? Follow the steps listed below.

Unlocking a front loader Whirlpool washer manually

• Unplug the power source.
• Turn off the water supply.
• Unscrew the screws on the back of the top panel.
• Remove the top panel (pull it back then up).
• Reach down behind the front panel.
• Look for a small circular tab on the right side.
• Pull it and the door will open.

Unlocking a top loader Whirlpool washer manually

• Unplug the power source.
• Turn off the water supply.
• Go to the drain pump cover. It’s near the bottom right of the washer on the front.
• Unscrew the cover and put it aside.
• Look for a plastic cord inside the washer and pull it.
• This will force a Whirlpool washer to unlock immediately.

Conclusion

That’s all the fix we have for a Whirlpool washer door that’s locked and won’t open. If they helped to solve your problem, feel free to share this article with friends and family that are dealing with the same issue.

For further inquiries, comment below or reach out to a professional technician near you.

READ: How to fix a Whirlpool dryer that isn’t heating

The post Whirlpool washer door is locked and won’t open? The fix appeared first on Home Gadgets.