However, it is possible to clean away the rust and proof it to prevent more rust in the future. Rust-proofing your shower caddy, even if it is stainless steel, is important since over time it may become susceptible to rust.

How to rustproof a shower caddy

Follow these easy instructions to rustproof your shower caddy:

• Take some clear boat wax, or water-resistant car was and coat the whole caddy with it using a wet sponge.
• Allow the wax to dry on the caddy for at least 20 minutes. The caddy should look a bit hazy when it is ready.
• Use a lint-free cloth to polish the surface to wipe off the wax till it is nice and smooth.

The above waxing method needs repeating every month. If you want a more lasting solution, get yourself rust-proof spray paint that you can use on the caddy. This is a fun way of doing it, and you can even match it to your bathroom décor. With this, your caddy should remain rust-free as long as the paint remains.

Read Also: Best tension pole shower caddies you can buy

How to remove rust from your shower caddy

It is not too difficult to remove rust from your shower caddy you need to know the correct technique. The following should help you quickly remove the rust:

1. Step one: remove the rusty modern shower caddy outside or on a flat surface since it is easier to clean that way.
2. Step two: clean the caddy using rust removing cleaner if you have some. If not, sprinkle some white vinegar all over the rusty shower caddy and sprinkle some baking soda on it.
3. Step three: allow the two to reach and soak in the rust. You can then use a scrubber to remove the rust. If it is difficult to do so, you may use steel wool but be sure not to remove the coating if it is coated.
4. Step four: rinse with warm plain water and dry using a towel or leave it to air dry.

Ensure that you remove all the rust from the caddy before going on with the proofing. Also, make sure that the plastic shower caddy is well dried before the next step.

Finally, you have managed to rust-proof your shower caddy. Note that if you take good care of it, you wouldn’t have to repeat this process often.

READ: Do digital bathroom scales need to be calibrated?

The post How to rust proof a shower caddy appeared first on Home Gadgets.

Solid soap particles work into crevices on the racks and shelves. They harden into a thick layer that requires effort to remove.

Before delving deeper into how to remove rust from chrome shower caddy, understand how grime and rust can negatively affect it. Grime can ruin your clean shower caddy through black solid and white solid deposits that form on it.

This mostly comes from toothpaste fluids left on the caddy to crystallize, conditioner, spilled shampoo since you don’t have a shampoo dispenser, and chunks of soap.

You may assume that getting the rust out of a shower caddy is easy. This is always not the case. Shower caddy models, even those marketed as rustproof, can gather rust when water seeps into the anti-rust coating.

Read Also: How do I keep my shower caddy from sliding down?

Removing rust and grime from a chrome shower caddy

This guide will highlight the steps you can take to clean grime and rust off your shower caddy.

1. Detach the rusted shower caddy from the showerhead, and brush loosened rust from the stainless steel with your hand. Ensure that all the bath essentials are removed from the caddy before cleaning.
2. Fill in the bathtub with enough water to submerge your caddy. To accurately gauge how many gallons you are going to use you can use a pitcher. Once this is done mix the water with ½ cup of vinegar per gallon.
3. Soak the caddy for about twenty to thirty minutes, or until the hard water spots and grime softens. As you pour vinegar the paste on your shower caddy will start to fizz and bubble. This breaks down the hard water spots and grime that persisted.
4. Use a nylon scrubber to remove heavy rust from the chrome caddy, but keep adding vinegar and baking soda as needed until the stain comes off.
5. Once it’s clean wipe it with a clean, dry towel buffing the surface and removing the wax to a mirror shine. If there are signs of rust spots apply a coat of nail polish or use a commercial rust remover to prevent further rusting.
6. Replace your shower caddy before you return the other bath essential.

That is it, you now have a clean shower caddy.

Read Also: How to install a tension pole shower caddy

The post How to remove rust from a chrome shower caddy appeared first on Home Gadgets.

How to correctly hang a shower caddy on tile

Follow the following steps when you want to hang your shower caddy on tiles without drilling or permanently marking the tiles.

1. Step one: it is crucial to clean the surface thoroughly, so there is no dirt on the surface. If the walls are quite dirty, clean them using soap and water, rinse then dry them off. Next, use alcohol to do this and ensure that it is thoroughly wiped down.
2. Step two: Run the shower caddy hook suction cup under some warm water and shake it off to remove the excess water. Stick the suction cups ensuring that no air is trapped inside as this may make them unstable hence unsuitable for hanging your shower caddy.
3. Step three: if you wonder how do you hold a shower caddy in place? You may use a silicone sealant around the outside of the cups. Let the sealant settle for about a day then you may mount your shower caddy.

Read Also: How to prevent a shower caddy from falling

Do not overload the hanging shower caddy as this may cause the suction cups to pop. If you are hanging from one suction cup ensure that you do not place more than 2L of products on it. Do not worry about removing the shower caddy when you use a silicone sealant. You can slip in a putty knife or even a regular small knife that will take it off quickly give you more flexibility especially when doing a thorough cleaning to get rid of rust or grime.

Using silicone adhesive is not a mandatory way to get the shower caddy to stay up. But, if you are uncertain about your ability to correctly stick suction cups for textured tile, then it is an excellent way of securing it. However, it is vital to use good-quality suction cups that are light and flexible. With the tips above, you should be able to hang your shower caddy on tile easily.

The post How to hang a shower caddy on tile appeared first on Home Gadgets.

Generally, putting together a tension pole caddy requires you to follow the steps mentioned below:

• Assemble the tension pole
• Shelves attachment
• Shower caddy assembly
• Checking if it fit

Assemble the tension pole

The tension pole comes looking like a shower curtain pole with springs fitted inside to create tension.

The best way how to assemble a tension pole is at the bathroom corners as this type of caddy is most suitable there. It is also designed to reach from the tub’s top to the shower’s ceiling.

Shelves attachment

Once you have assembled the tension pole, the next step is to attach the shelves. The shelves will glide on or snap on over the pole. Use the suction cups or clips that come together with the installation kit to mount in place the shelves.

Read Also: How to keep corner shower caddy from falling

Shower caddy assembly

Place in the corner the shower caddy. Then hold the tension pole on one end at the top of your bathtub, pull the pole down on the other end and slide the top of the pole towards the corner of the bathtub until it gets to the ceiling.

Once done, gently release the pole until it presses on the ceiling. Keep twisting the pole until there is enough tension in the springs to keep it in place.

Is the tension pole shower caddy well fitted?

After you put together a shower caddy with spring it is important you check it is well fitted. To do this, gently pull on the pole and check if it moves. It is properly installed and ready to be used if it does not move easily when you pull on it.

Make the most out of your bathroom corners by installing a tension pole shower caddy. There is a wide range of options available in the market. Choose what you love then proceed with this DIY.

If you are looking to install a tension pole shower caddy, you should be able to do the installation on your own with this simple guide.

Read Also: How to hang a shower caddy on tile

The post How to install a tension pole shower caddy appeared first on Home Gadgets.

How do you keep your shower caddy from falling?

The first thing is that on how to keep the shower caddy from falling is to stop hanging it from the showerhead. It is dangerous for your plumbing, and it doesn’t look right.

The following are easy and practical ways of hanging your shower caddy and not risk it falling:

1. Use caddies with suction cups

If your bathroom is tiled, suction cup caddies are a great option. You need to thoroughly clean the surface using rubbing alcohol and stick it on the wall.

If you are not sure about how to make a shower caddy stick, you may use silicone sealant which is easily removable when you need to.

2. Get suction cup hooks

If your shower caddy was hanging from the shower, a good alternative is to get a shower caddy to stick through suction hooks.

These easily attach to the side of your wall and will secure your caddy, so it doesn’t fall.

3. Buy a tension pole shower caddy

If you have many items in your bathroom that don’t fit in your smaller caddy, then tension pole caddies are a great option. It doesn’t require any drilling, so it is a great way to keep a shower caddy from slipping.

The best part is that it can stay up with support from your ceiling to floor with many of them extend up to nine to ten feet.

The above options will ensure that your shower caddy problems are over so no more messy bathroom. Try any of the options depending on how much space you have as well as items.

Read Also: Best wall mounted shampoo and conditioner dispenser

The post How to keep a shower caddy from falling appeared first on Home Gadgets.